As some of you know, I bought a Catalina 22 a few years back; I needed a boat that could take my many grandchildren cruising, and keep my wife from cursing. For a year I tried to race the Tanzer and cruise the Catalina. BUT with four grandchildren to raise, two boats was one too many. I still miss the Tanzer--what a great little boat!
The Catalina, Bootstrap, is about the same age as the Tanzer, Iteration. I am slowly bringing it up to date, but I doubt that I will paint it because I don't have a large enough heated space to do it in the winter, and I am not giving up summer to paint a serviceable boat.
At any rate--You can see some of the work on the Catalina on You Tube. Look up Jim's Little Boat Catalina 22 and any number of dramatic, spine-tingling, fix-up videos are available. :) Best to all of you and your wonderful Tanzers.
My only equipment is an iphone and a microphone so the videos are not very sophisticated.
Jim Slosson
Thursday, February 13, 2020
Monday, November 12, 2018
Tanzer 16, Capsize
Part One: The Capsize
The first thing you need to know about capsize in a Tanzer 16 is that you will fall out of the boat on the mast side—not the centerboard side.
![]() |
| This is not a picture of us. This was taken from the Tanzer 16 Association publication. Our committee boat guys were so busy taking care of us that they had no time for pictures. |
In that one crucial second when the boat passes through 90 degrees—while you are falling out—try to uncleat the main and the jib. This will matter a great deal in the following minutes. Luckily—well not totally luck—we were able to uncleat both. Of course, you might ask why they were cleated in the first place in a stiff breeze with big, puffy shifts.
See the rest of the story on the page titled "Capsize."
Monday, October 8, 2018
Sail bags need to go home
Sail bags need to go home, October 10, 2018 Putting my Catalina 22 sails away for the winter and stumbled on to these two sail bags. The yellow one is for the furling Genoa. The smaller, dirty, white one appears to be the original bag for the original jib. I would like to send them along to the latest owner of my old boat, Iteration, sail number 1306. Last I heard it was for sale in northern King County, Washington (think Seattle area). If the owner will contact me, I will send them along--and I will pay for the shipping. Jim Slosson jslosson@aol.com
Monday, July 2, 2018
Swim ladder? Safety ladder?
Swim ladder? Safety ladder? June 6, 2018 Suppose your Tanzer capsizes--further suppose that you do manage to get it upright before it goes turtle. How are you going to get back in?
If you are young, and strong, and tall, and not too cold--you might be able to pull yourself over the side or maybe over the transom--probably not. A ladder is your best bet.* I could never find one that fit. The one West Marine sells doesn't really fit the transom. Andy Kane posted this picture on Facebook.
Oceansouth Transom Ladder Stainless Steel Folding 2
Steps
I used aluminium backing plates, and bedded the hardware in silicone. I also added washers inside the cups, because the metal feet wore through my last transom ladder and bit into the gelcoat.
I used aluminium backing plates, and bedded the hardware in silicone. I also added washers inside the cups, because the metal feet wore through my last transom ladder and bit into the gelcoat.
*On my boat, I kept a short length of rope with a loop in the end for my foot. Fortunately, I never had to test it.
Monday, May 7, 2018
Ultimate Dinghy Cradle
Ultimate Dinghy Cradle -- May 7, 2018 -- Since I sold my Tanzer 16 (now I crew and work on committee boat) I don't get down to the dinghy dock as often as I used to. Imagine my surprise when I saw this "up-scale" launch/retrieve cradle created by a local Harpoon sailor, Kevin. Kevin is a real craftsman and he believes that anything worth doing is worth over-doing. I can't wait to see him launch and retrieve his 500-pound boat. It is about the same weight as the Tanzer 16. The pictures can tell the rest of the story. All the metal is aluminum or stainless steel. Follow up: I watched Kevin retrieve and launch the boat. Single person operation--easy--safe--love it when a plan comes together.
Thursday, February 8, 2018
Tanzer 16 Iteration: New Owner
Tanzer 16 Iteration: New Owner--Kit--February 8, 2008 Sure I am going to miss the boat, but it is going to a really great couple. (Could not believe it sold so quickly.--That is the second Tanzer that I sold in about a week.)
Kit and I spent a few hours going over the rigging procedures and he headed north of Seattle. Since the boat was made in Arlington, WA, it is almost home. Good luck, Kit.
Kit and I spent a few hours going over the rigging procedures and he headed north of Seattle. Since the boat was made in Arlington, WA, it is almost home. Good luck, Kit.
Sunday, February 4, 2018
Overnighting on the Tanzer 16
Overnighting on the Tanzer 16--February 4, 2018 -- I have to preface this piece by saying that I have never spent the night aboard my Tanzer 16. When I planned to go camping, but we never got it done. Since we are blessed with plenty of state parks on Puget Sound, my idea was simply to pull the boat up on the beach and sleep on the ground--then we got a Catalina 22...
BUT, some folks do overnight on the Tanzer--and they kind of do it in style.
Brian Mrachek, Boca Raton, Florida, did a couple of open water races and came up with a roomy boom tent.
Brian is a fairly tall guy and I know that he and his dad did spend a few nights aboard. I don't know what he did for a toilet, but as I remember, his race did allow for landfall and it had way point check-ins.
Here are two other approaches to tents. John Juday uses a boom tent. That would be plenty for me, but I am only 5'7" and getting smaller every year.
Here is another cockpit tent.
Bunks? You have to figure out how to fill in the space between the seats. Usually that involves some kind of a platform.
Brian did it this way:
Well folks--it has been a great run. I have truly enjoyed my Tanzer, but I have too many boats. I will be selling my boat, "Iteration" this spring--so this may be my last post--unless I see something interesting on the Tanzer 16 Facebook group. I will keep this blog in place as long as can.
Jim Slosson jslosson@aol.com
BUT, some folks do overnight on the Tanzer--and they kind of do it in style.
Brian Mrachek, Boca Raton, Florida, did a couple of open water races and came up with a roomy boom tent.
Brian is a fairly tall guy and I know that he and his dad did spend a few nights aboard. I don't know what he did for a toilet, but as I remember, his race did allow for landfall and it had way point check-ins.
Here are two other approaches to tents. John Juday uses a boom tent. That would be plenty for me, but I am only 5'7" and getting smaller every year.
Here is another cockpit tent.
Bunks? You have to figure out how to fill in the space between the seats. Usually that involves some kind of a platform.
Brian did it this way:
![]() |
| I think this photo is from John Juday. But--it does include a toilet. |
Well folks--it has been a great run. I have truly enjoyed my Tanzer, but I have too many boats. I will be selling my boat, "Iteration" this spring--so this may be my last post--unless I see something interesting on the Tanzer 16 Facebook group. I will keep this blog in place as long as can.
Jim Slosson jslosson@aol.com
Thursday, January 18, 2018
Tanzer Replacement Hardware
Tanzer Replacement Hardware, This just in from Peter Johnson --January 18, 2018 I always wondered where the Tanzer folks got their hardware. It had (has) a unique logo but no company name. Turns out that Peter who is quite a tinkerer (check out his posts on the Tanzer 16 Facebook page) knows exactly where to get it:
racelitehardware.com
It looks exactly like the fittings on my boat and the prices seem very reasonable compared to replacements from other sources. Thank you for the tip, Peter.
racelitehardware.com
It looks exactly like the fittings on my boat and the prices seem very reasonable compared to replacements from other sources. Thank you for the tip, Peter.
Tuesday, September 5, 2017
Dinghy Dock--New Cradle Design Needed
Dinghy Dock--New Cradle Design Needed, September 5, 2017 I need a new cradle for the dinghy dock. Last spring we added two rollers and it helped only a little. The Tanzer is a heavy boat--450 pounds before you add: the mast, the boom, the centerboard, the rudder, the outboard, the sails, the anchor, the paddle, the boat hook, the spinnaker pole, the sails, the life jackets, the beer--but of course beer goes out, but doesn't come back.
Seriously this is a lot of weight to haul up out of the water. We can do it now because we have a two-speed winch and two fairly strong old guys. I could never do it by myself--which makes it difficult to single-hand. I would sure appreciate a better design if you have one to share. The boat comes out on September 11 so I have all winter to work on it.
jim
Seriously this is a lot of weight to haul up out of the water. We can do it now because we have a two-speed winch and two fairly strong old guys. I could never do it by myself--which makes it difficult to single-hand. I would sure appreciate a better design if you have one to share. The boat comes out on September 11 so I have all winter to work on it.
jim
![]() |
| Even the Harpoons are lighter than the Tanzer. |
Monday, August 14, 2017
Tanzer 16--There's always one more thing-- Perfect Spinnaker Hoist--ends up in the drink.
![]() |
| First it came apart. Then it was glued back together. |
![]() |
| Then a hole was cut in the deck. |
![]() |
| The chute was glued into the deck and ridge built up; then the whole thing was faired in. |
![]() |
| Then a roller furler was added for the jib to make things easier. |
![]() |
| Of course we needed a spinnaker sock. Ours was made by Shurr Sails in Pensacola. We modified it twice. |
![]() |
| Of course if you are going to have a chute, there will need to be a retrieval patch on the spinnaker--back to Shurr Sails again. |
Then you need to practice (a lot) because a spinnaker is a fussy kind of sail.
![]() |
| We ended up sailing over the spinnaker before this mess was straightened out. |
And after all of that. We did 14 consecutive hoists and sets that were darn near perfect. So finally we got to use the spinnaker in a race--and yet it ended up drying in the shop....another little disaster...
.....because there is always just one more thing.
![]() |
| The little ring on the snap shackle hung up on the roller furler. Which of course opened the shackle. |
So our near perfect hoist went straight in the water.
Oh, and one more thing. The shackle stayed at the top of the mast. Not to worry. A hook taped to a stick taped to a boat hook retrieved the shackle without dropping the mast.
So now we only have three races left. My crew who worked on this all year long is gone for the season. Oh well--new (different) shackle--and we will try to do better next year.
Saturday, July 29, 2017
Tanzer 16 -- Two Opportunities to Race
Tanzer 16 -- Two Opportunities to Race--Two opportunities to race your Tanzer 16 or Overnighter. South Sound Sailing Society hosts The Race to somewhere on Saturday, August 19 and the Fall Regatta on September 10. Worth the drive to Olympia. If we get enough interest, we will reserve a few tables at local.
Race to Somewhere 1st leg. We sail out a few miles to Gull Harbor. First to finish (no handicap) gets an award--last to finish gets the rubber ducky. After lunch we race back to Olympia--this is a handicapped race. I like to call it the PNW Tanzer Invitational--if you have a boat you are invited. Email jslosson@aol.com for details. Excellent launch facilities located near the start/finish line.
Fall Regatta standard round-the-buoys race. Usually three or four separate races.
Friday, July 7, 2017
Tanzer 16 -- Those handy little cable ties
Tanzer 16 -- Those handy little cable ties -- July 7, 2014 I keep a little bundle of short cable ties in each of the tool boxes for my boats. They are handy--they are cheap.
Stainless snap shackles are inexpensive and widely available. Problem is, there's no eye in the shackle and it's easy for them to fall off the line. Cheap fix--use a cable tie.
Whenever you tie a knot there is a little piece of line hanging out of the knot--just waiting to snag on something. You can tidy that up with a cable tie.
Of course bigger ties are good for lashing things in place. On one trailer we use cheap Harbor Freight magnetic lights (the trailer that only gets used twice a year). Cable ties (two daisy-chained together) insure the lights don't fall off when we hit a pot hole.
Here's another use: I used the ties for markers on a lead line. With a bit of effort they can be threaded through the line. One little black tie for one fathom, two for two fathoms, ... (With 15-foot tidal changes, it is nice to know how much water is under your boat when you anchor.)
Stainless snap shackles are inexpensive and widely available. Problem is, there's no eye in the shackle and it's easy for them to fall off the line. Cheap fix--use a cable tie.
![]() |
| This happens to be the temporary shroud for raising the mast, but where- ever I use one of these little shackles, I secure it with a cable tie. |
Whenever you tie a knot there is a little piece of line hanging out of the knot--just waiting to snag on something. You can tidy that up with a cable tie.
![]() |
| This is bowline on some 1/8-inch line. The tie tidies things up and insures the knot won't slip out of slippery line. |
Of course bigger ties are good for lashing things in place. On one trailer we use cheap Harbor Freight magnetic lights (the trailer that only gets used twice a year). Cable ties (two daisy-chained together) insure the lights don't fall off when we hit a pot hole.
Here's another use: I used the ties for markers on a lead line. With a bit of effort they can be threaded through the line. One little black tie for one fathom, two for two fathoms, ... (With 15-foot tidal changes, it is nice to know how much water is under your boat when you anchor.)
Thursday, May 25, 2017
Tanzer 16--Never underestimate the power of last place
Tanzer 16--Never underestimate the power of last place -- May 25, 2017 It was the second night of racing this season, and we probably sailed our best three races since we began racing three years ago. Races one and three weren't our wind--too light, but we kept the stern up, Tony kept the boat moving, our tacks were crisp, and we stayed with the fleet. We finished in the middle. The second race was the most interesting.
We were messing about and got a lousy start. That's us, the orange boat, on port tack. At this point there were nine boats racing and we were ninth. That meant we would get nine points. The interesting thing about racing sailboats is that you get nine points if you come in a close last or a way back dead last.
We looked up and asked ourselves, "Do you see more wind on the starboard side of the channel? Yes, and less current too." So we decided, "What the hell, we are already last, nine points is nine points lose by a little or lose by a lot--last is last." We stayed on port tack and sailed away from the fleet who were busy covering one another.
We got more wind. Less current. We wanted to tack on the rhumb line but decided to stay high of the mark since the current was running strong. Two of the lead boats tacked to soon and had to make two extra tacks. Then we headed for the mark on starboard tack got a lift. The fleet (now on port tack) got headed.
So we turned the corner in fourth place. Then the wind shifted for a dead down wind run to the finish line and we stole enough air from the spinnakers ahead of us to save time on another boat.
Don't get me wrong. It's always better to be out in front covering the competition, but last place can have it's own advantages.
We were messing about and got a lousy start. That's us, the orange boat, on port tack. At this point there were nine boats racing and we were ninth. That meant we would get nine points. The interesting thing about racing sailboats is that you get nine points if you come in a close last or a way back dead last.
![]() |
| It was actually quite a bit worse than this not to scale drawing would indicate. |
We looked up and asked ourselves, "Do you see more wind on the starboard side of the channel? Yes, and less current too." So we decided, "What the hell, we are already last, nine points is nine points lose by a little or lose by a lot--last is last." We stayed on port tack and sailed away from the fleet who were busy covering one another.
We got more wind. Less current. We wanted to tack on the rhumb line but decided to stay high of the mark since the current was running strong. Two of the lead boats tacked to soon and had to make two extra tacks. Then we headed for the mark on starboard tack got a lift. The fleet (now on port tack) got headed.
![]() |
| A three knot current shoved the early tackers below the mark. We held on longer and then the lift carried us around the mark on a close reach. We made up more time. |
So we turned the corner in fourth place. Then the wind shifted for a dead down wind run to the finish line and we stole enough air from the spinnakers ahead of us to save time on another boat.
Don't get me wrong. It's always better to be out in front covering the competition, but last place can have it's own advantages.
Sunday, May 21, 2017
Tanzer 16 -- It's always something--spinnaker pole
Tanzer 16 -- It's always something--spinnaker pole -- May 21, 2017 The spinnaker pole is a pretty simple device--piece of aluminum tubing. Hook in the middle. Spring loaded snap hook on each end. Worked flawlessly for two years. All of a sudden it jams. No reason. No grit, dirt or salt inside. Teflon spray doesn't help. Of course the end that jams is the one with the pressed fitting not the one held in by a screw.
Solution: Disassemble. Cut through the aluminum by not the plastic plug. Sand all the pieces with 220 grit (it takes a lot of sanding). Lubricate with Teflon. Reassemble. Seems to work.
Solution: Disassemble. Cut through the aluminum by not the plastic plug. Sand all the pieces with 220 grit (it takes a lot of sanding). Lubricate with Teflon. Reassemble. Seems to work.
Saturday, May 20, 2017
Tanzer 16, Little Fixes, jib sheet cleat, tiller
Tanzer 16, Little Fixes, jib sheet cleat, tiller, May 20, 2017 -- This is the first winter that we did almost nothing to the boat. Two little modifications have made it just a little easier to sail.
Cam cleats were added to each side of the pedestal making it easy for crew to cleat off the jib without a line running across the cockpit. Thus freeing up more time to fiddle with other little adjustments.
And, silly as it seems, we needed to fuss with the length of the tiller. We brought it back to normal length and moved the hiking stick forward a bit. All this in an effort to get the weight forward on upwind beats. (More about this later when we review out last race.)
We are still not happy with our handling of the spinnaker--but we are getting closer. The next thing we try will be to shorten the retrieval sock or eliminate it altogether. If we want to use this sail in our short races, it has to go up and come down quickly and easily. Last week we did not use the spinnaker and gained on the two Harpoons that used up a lot of time getting their chutes up and down.
Cam cleats were added to each side of the pedestal making it easy for crew to cleat off the jib without a line running across the cockpit. Thus freeing up more time to fiddle with other little adjustments.
And, silly as it seems, we needed to fuss with the length of the tiller. We brought it back to normal length and moved the hiking stick forward a bit. All this in an effort to get the weight forward on upwind beats. (More about this later when we review out last race.)
![]() |
| Shortened the tiller back to normal length, and, just cause I had a can handy, added some rubber grip paint to the end. |
We are still not happy with our handling of the spinnaker--but we are getting closer. The next thing we try will be to shorten the retrieval sock or eliminate it altogether. If we want to use this sail in our short races, it has to go up and come down quickly and easily. Last week we did not use the spinnaker and gained on the two Harpoons that used up a lot of time getting their chutes up and down.
![]() |
| The sail works great. We are just too slow--in short races that is really a big problem. It we want to use it, we need to get it up and pulling in less than 30 seconds. |
Friday, May 12, 2017
Tanzer 16--Rain--Rain--Rain--Drying sails
Tanzer 16--Rain--Rain--Rain--Drying sails -- May 12, 2017 Sails are expensive, I like mine to look nice. That means drying them out to prevent formation of our state flower, mildew. Hate those little black spots. So before we went sailing yesterday I cleaned the shop.
It rained like crazy, but worth it. We had one of those rare days when the wind was blowing 10 knots, but the water was flat. We put the boat on a broad reach and flew up the bay. We practiced weight placement on a beat, a run, and a broad reach. Weight forward on a beat and reach definitely improve speed and shorten tacking time.
Now the clean up. Sails, bags, rain gear spread out on the floor--glad we didn't fly the spinnaker.
After our tests, we decided to shorten the tiller back to its original length.
Thinking about modifying the way we launch the spinnaker--more later along with new jib sheet cleats on the pedestal.
It rained like crazy, but worth it. We had one of those rare days when the wind was blowing 10 knots, but the water was flat. We put the boat on a broad reach and flew up the bay. We practiced weight placement on a beat, a run, and a broad reach. Weight forward on a beat and reach definitely improve speed and shorten tacking time.
Now the clean up. Sails, bags, rain gear spread out on the floor--glad we didn't fly the spinnaker.
After our tests, we decided to shorten the tiller back to its original length.
Thinking about modifying the way we launch the spinnaker--more later along with new jib sheet cleats on the pedestal.
![]() |
| Dry sails stay new looking a lot longer. |
![]() |
| Cut the tiller back to its original length. The extra five inches was good for single handing--but not so swell with a crew. |
Friday, May 5, 2017
Tanzer 16, First Race of 2017, 4 boats and lightening
Tanzer 16, First Race of 2017, 4 boats and lightening -- May 5, 2017 -- There are old sailors and there are bold sailors. It seems there are also lucky sailors. The weather was great until 1300--then the humidity rose sharply; the clouds built up quickly. It was certain that a rare Puget Sound thunderstorm was on its way. (Once spent a very long summer at Fort Leonard Wood, Missouri -- I know what a thunderstorm feels like and how it smells when it is building.)
By 1500 it was rumbling all over the county and by 1600 trees were falling and power was going out. We make our go no go decision for racing about 1630. I am willing to sail in the rain. I am willing to sail in rain and too much wind (up to a point) and I am willing to sail in rain with no wind. I am not willing to sit on the water with a 23-foot aluminum stick up in the air during a lightening storm. (A day later, the news said that a motorcycle rider was hit by lightening and killed during the peak of the storm.)
There was lots of chatter all afternoon on email -- "Go?" "No go?" "Maybe I will go down do the dock and see."
In the end four dinghies showed up along with the committee boat. They found a little crack in the storm and got in three races.
In the words of Fleet Captain, Jim Findley, "4 brave diehard sailors got in 3 dinghy races between the lightning storms. There is a thin line between brave and stupid. I THINK we were on the brave side of the line. Jim."
A picture taken later in the evening -- after the race, shown below. So we are starting the first series with a DNS and at least 15 points at five points per race -- Oh well, it was the right decision for us.
By 1500 it was rumbling all over the county and by 1600 trees were falling and power was going out. We make our go no go decision for racing about 1630. I am willing to sail in the rain. I am willing to sail in rain and too much wind (up to a point) and I am willing to sail in rain with no wind. I am not willing to sit on the water with a 23-foot aluminum stick up in the air during a lightening storm. (A day later, the news said that a motorcycle rider was hit by lightening and killed during the peak of the storm.)
There was lots of chatter all afternoon on email -- "Go?" "No go?" "Maybe I will go down do the dock and see."
![]() |
| This strike was a couple of miles south of our race course. |
In the end four dinghies showed up along with the committee boat. They found a little crack in the storm and got in three races.
![]() |
| I think Garner Miller took this picture. I was home waiting for the lights to go out. |
In the words of Fleet Captain, Jim Findley, "4 brave diehard sailors got in 3 dinghy races between the lightning storms. There is a thin line between brave and stupid. I THINK we were on the brave side of the line. Jim."
A picture taken later in the evening -- after the race, shown below. So we are starting the first series with a DNS and at least 15 points at five points per race -- Oh well, it was the right decision for us.
![]() |
| Posted by KOMO-TV. |
Monday, May 1, 2017
Tanzer 16 Dinghy Dock --added a roller
Tanzer 16 Dinghy Dock --added a roller--May 1, 2017 Spent all winter (and spring that felt like winter--it has been the wettest winter/spring in 126 years) thinking about how to make the dinghy dock easier to get the 400 lb+ Tanzer up on the bunks. I probably went down and looked at it five times, but couldn't come up with a plan.
Since the boat is going in the water in two days, I finally sucked it up and went down there in the rain with some string, sticks, and a measuring tape. The only improvement I could think of was to add another roller. It's the one with the lighter color wood. Dinked around and determined the height and position of the roller. Then I was able to make it at home.
The roller might be 1/2-inch high (we can remove the spacer between the 2 x 8's if we need to). We won't really know until we pull the boat up on the dock. Wish me luck--oh yeah, they are predicting lightening for our first race on Thursday. Luckily the marina has a bar.
Since the boat is going in the water in two days, I finally sucked it up and went down there in the rain with some string, sticks, and a measuring tape. The only improvement I could think of was to add another roller. It's the one with the lighter color wood. Dinked around and determined the height and position of the roller. Then I was able to make it at home.
The roller might be 1/2-inch high (we can remove the spacer between the 2 x 8's if we need to). We won't really know until we pull the boat up on the dock. Wish me luck--oh yeah, they are predicting lightening for our first race on Thursday. Luckily the marina has a bar.
Friday, April 21, 2017
Race Announcements -- 2017 -- May thru September
Weekly: Thursday evenings. We usually finish while there is still light to put the boat back on a trailer. 1st Series--May 4, May 18, June 1. Summer Series--June 15, June 29, July 13. August Series--July 27, August 10, August 24. There may be racing on the alternate Thursdays, but the committee has not organized that activity as of today. (check with me after May 11)
![]() |
| Eric was first to finish and first overall in our "Race to Somewhere." |
![]() |
| A rare photo of 1306 first at the starting line. (That's us.) |
Weekend Races/Regatta
Race to Somewhere. Saturday, August 19. We take off from the harbor area in Olympia and sail toward one of the nicest coves in South Sound, Gull Harbor, a distance of about 2.5 miles. Only two prizes First to finish and last. We eat a great lunch. Then there is a somewhat more serious race back to Olympia. The afternoon usually provides more steady winds. We finish in time to load trailers in the light. Last year a small fleet of 6 Mutineers beat all of us in the first race.
Dinghy Regatta. Sunday, September 10 (the week after Labor Day). Usually three races with longer courses than the Thursday night races.
Social Time. If Eric and find out that we will have some visiting Tanzers, we will arrange for some beer, pizza, and sailing talk. Please let us know. jslosson@aol.com If we get five visitors, maybe we will even come up with a trophy or a plaque. jim
Thursday, December 15, 2016
Tanzer 16--Stern up improves upwind peformance
Tanzer 16--Stern up improves upwind performance -- December 15, 2016 For a couple of years the two best racers in our little fleet said that we needed to put more weight forward when we were going upwind. Actually Kevin--the more colorful of the two--said, "Get the ass up in the air."
The fall regatta was a unique opportunity. Winds were light and variable, we had too much crew, and the committee boat was willing to take lots pictures. It was helpful that we race against two Harpoons that have approximately the same rating as our Tanzer. We had some great starts--different post--but obviously we weren't going to win any races--time to experiment.
If you were going for comfort and ease of moving about the cockpit, the boat would trim out like this. The stern is in the water, and it is, of course, aggravated by hanging an outboard on the back.
We intentionally tried different trims by putting my weight and Susan--not so much weight--as far forward as we could get. Tony pulled out the extension and scooted forward too. The boat trimmed out like this.
What we learned from these experiments:
The fall regatta was a unique opportunity. Winds were light and variable, we had too much crew, and the committee boat was willing to take lots pictures. It was helpful that we race against two Harpoons that have approximately the same rating as our Tanzer. We had some great starts--different post--but obviously we weren't going to win any races--time to experiment.
If you were going for comfort and ease of moving about the cockpit, the boat would trim out like this. The stern is in the water, and it is, of course, aggravated by hanging an outboard on the back.
![]() |
| At this particular moment we were headed down wind, but this weight dis- tribution gives an even worse case of stern down when you are headed upwind. |
We intentionally tried different trims by putting my weight and Susan--not so much weight--as far forward as we could get. Tony pulled out the extension and scooted forward too. The boat trimmed out like this.
![]() |
| In this picture Tony is still farther back. Susan and I are are up on the deck and the transom is all the way out of the water. |
![]() |
| In this photo we had Tony move forward while we sat on the deck. The stern is way out of the water, and the bow is probably down a little too much. |
What we learned from these experiments:
- Weight forward definitely improves tacking. With the weight forward, even when we were over-trimmed, the boat tacked as fast as the competition. It also was far less likely to get locked in irons even in light winds. In addition, it took a lot less rudder to turn through the eye of the wind. We assume that moving the weight forward, and thus altering the trim, moved the pivot point of the boat forward.
- Weight forward reduces wetted surface. This made the boat a little faster in the 3 - 5 knot winds. In general we were almost as fast as the Harpoons even with the extra weight. (Almost is not fast enough when you owe them a few seconds every 15 minutes.)
- Weight forward improved pointing--a little. We usually point almost as high as the competition, but with the weight forward it was improved slightly--they did not outpoint us. When we added a little makeshift barber hauler (not legal in class rules by the way) we pointed even a little higher. We could also get another degree by holding the boom up to weather. I have no doubt that the bridge style traveler is a better racing configuration than the standard traveler. But I doubt that I am a serious enough racer to make that change. For now we will just hold the boom when we are not sure we will make the weather mark.
- Weight forward is kind of a pain in the butt. For starters we should leave the outboard at home. The engine plus the bracket puts a lot of weight at the far end of the lever that is the boat sitting in the water. It takes a lot of weight to compensate for that 2 hp Honda which was pretty much the lightest four-stroke I could find. But it can be a long paddle back to the marina so the engine probably stays. Sitting forward of the centerboard trunk requires a lot of mobility for the crew. Since our youngest guy is 63 and I am 69, that is not a small issue.
So racing summary for the year. We continue to improve. We are not beating ourselves with bad maneuvers We did manage to beat a few boats now and ten. Kevin, did honor us with a hard luff at the starting line so that we had to do a 720 turn.* If we get the spinnaker thing working and keep our weight forward. We might just win some races.
*This will be a later post. In retrospect, I think maybe it wasn't a legal luff and I should have protested him. Maybe we were just giddy to start first a couple of times.
Subscribe to:
Posts (Atom)












































